Filter
Top Products
41
Leica RM2245
• To open the jaws (78) and (79) lightly loosen
the 3 screws (
81) with an Allen key size 4
(
71).
• Insert the foil ribbon (72) from behind to po-
sition it between the movable jaw (79) and
the fixed jaw (78).
• To clamp the foil, first tighten the screw in
the middle and then the other two screws
(81) with the Allen key (71).
• Place the foil clamp (82) in the standard
specimen clamp so that the beveled surface
(80) on the back of the foil clamp points to
the right or left.
• Turn the knurled screw (66) clockwise to se-
curely clamp the foil clamp in the standard
specimen clamp.
6.2.4 Foil clamp type 2
The foil clamp type 2 is appropriate for large foil ribbons.
It is mounted in the standard specimen clamp.
Fig. 32
6. Optional accessories
71
72 7978
66
81
80
82