Support User Manuals

Invacare TDX Spree Mobility Aid User Manual

Open as PDF

of 80

SECTION 5—WHEELCHAIR OPERATION

Part No 1149267 43 TDX® SC TDX® Spree

Repositioning Joystick

Van Seats

NOTE:Forthisprocedure,refertoFIGURE 5.9.

NOTE:Takenoteofpositionandorientationofmountinghardwareforreinstallingthejoystick

assembly.

1. Turntheadjustmentlocklevertoreleasethejoystickmountingtubefromthe

mountingbracket.

2. Removethejoystickmountingtubefromthewheelchair.

3. Removethethreehexmountingscrews,bushingsandlocknutsthatsecurethe

mountingbrackettothethreemountingholesonthearmrestplate.

NOTE:Themountingbracketismountedtotheinsideofthearmrestplate.

4. Repositionthemountingbracketontheoppositearmrestplate.

5. Usingthethreehexmountingscrews,bushingsandlocknutssecurethemounting

brackettothethreemountingholesofthearmrestplate.

6. Ifnecessary,performthefollowingtorepositiontheadjustmentlock:

A. Slidetheadjustmentlockfromthemountingbracket.

B. Rotateadjustmentlock180°andslideadjustmentlockovertheoppositeendofthe

mountingbracket.

7. Slidejoystickmountingtubethroughthemountingbrackettothedesiredposition

andsecureadjustmentlocktotubebyturningleveronadjustmentlock.

FIGURE 5.9 Repositioning Joystick - Van Seats

Locknuts

Bushings

Armrest Plate

Mounting Bracket

Hex Mounting Screws

Adjustment Lock Lever

Joystick Mounting Tube

NOTE:Joystick 

notshown.

previous next