Filter
Top Products
4
SPECIFICATIONS
NOTE: All specifications apply to Tilt only, Recline only and Tilt/Recline systems except where specified.
All specifications are approximate.
NOTE: The procedures in this manual refer to RWD and FWD models except where specified.
NOTE: Refer to the wheelchair owner's manual for complete specifications on base and operation.
S
P
E
C
I
F
I
C
A
T
I
O
N
S
SPECIFICATIONS
Seat Width Range:
Seat Depth Range:
Back Height Range:
Recline Only and Tilt/Recline:
Tilt Only:
Back Angle Range
Tilt Only Systems:
Tilt Range
Tilt Only Systems:
Tilt/Recline Systems:
Recline Range
Recline Only and Tilt/Recline Systems:
Seat-to-Floor:
*Overall Width:
*Overall Height:
*Overall Length:
Weight of Seating System:
Armrests
Tilt Only:
**Recline Only and Tilt/Recline Systems:
Legrests:
Headrests:
16 to 22-inches - In 1-inch increments
16 to 22-inches - In 1-inch increments
20 to 26-inches - In 1-inch increments
20 to 25-inches - In 1-inch increments
90
o
to 115
o
- in 5
o
increments
0
o
Seat Angle - 0
o
to 45
o
5
o
Seat Angle - 5
o
to 50
o
0
o
Seat Angle - 0
o
to 45
o
5
o
Seat Angle - 5
o
to 50
o
0
o
Seat Angle - 90
o
to 175
o
5
o
Seat Angle - 95
o
to 175
o
0
o
Seat Angle - 18-1/4-inches
5
o
Seat Angle - 19-3/4-inches
25 to 27-inches
53-inches
48-inches - in upright position
105 lbs.
Flip Back, Adjustable Height (9 to 13-inches) - Desk or Full Length
Adjustable Height (11 to 16-inches) - Desk or Full Length
Mechanical Elevating/Genius Legrests
Power Legrests
Curved, Contoured, Small or Large
*NOTE: 18 x 18 Tilt/Recline System on Storm Base (short frame) with AT5544 front riggings in minimum
position, seat angle of 5
o
, back height of 24-inches and headrest.