Filter
Top Products
5 QUICK RELEASE DUAL MOUNT
Part No. 1171914
25 Invacare® Matrx® MX1
5.9 Installing the Back
1. Loosen the four mounting screws securing the adjustable mounting
bracket D to the back pan E.
2. Adjust the width of the adjustable mounting bracket so that it aligns
with the mounting pin assembly on the clamp body.
3. Lift the lever F on the adjustable mounting bracket to unlock it.
4. Insert the upper and lower pins G into the notches H in the
adjustable mounting bracket.
5. Push down on the back pan to ensure the mounting pins are
properly seated inside the notched recess of the adjustable
mounting bracket.
6. Press the lever down to lock the back pan into place.
The instructions in this section apply to both sets of
mounting hardware.
The right side is pictured in the figures in this procedure.
The mounting pin assembly A is secured to the slots B of
the clamp body C.
A
INSIDE VIEW
B
C
2
3
4
C
A
F
D
E
H
G
H
G
6