Filter
Top Products
4 FIXED DUAL MOUNT
Invacare® Matrx® MX1
20 Part No. 1171914
4.9 Adjusting the Back Angle and Back Depth
1. Loosen the screws A on the side of both clamp bodies B.
2. Adjust the angle adjustable brackets C in the clamp bodies to
achieve the desired back angle and back depth.
3. Tighten the screws on both clamp bodies to secure the back into
position.
4.10 After Installation
1. Verify that all mounting hardware is fully tightened.
2. Ensure that the back is securely attached to the wheelchair.
Angle and depth adjustments must be made equally on
both sides.
A
B
C