Filter
Top Products
Warnings
Warnings
The following
warnings are for the setup, use, grounding, maintenance and repair of this equipment. The
exclamation p
oint symbol alerts you to a general warning and the hazard symbol refers to procedure-specific
risks. When th
ese symbols appear in the body of this manual or on warning labels, refer backtothese
Warnings. Pr
oduct-specific hazard symbols and warnings not covered in this section may appear throughout
the body of th
is manual where applicable.
WARNING
FIRE AND EX
PLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
•Keepwork
area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Ground all equipment in the work area. See Grounding instructions.
•Useonly
grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless
they are antistatic or conductive.
• Stop operation immediately if static sparking occurs or you feel a shock, Do not use
equipment until you identify and correct the problem.
• Keepaw
orking fire extinguisher in the work area.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can
cause electric shock.
•Turn
off and disconnect power at main switch before disconnecting any cables and before
serv
icing or installing equipment.
• Connect only to grounded power source.
• All electrical wiring must be done by a qualified electrician and comply with all local codes
and regulations.
333282B 9