Filter
Top Products
GFK-1527A A-1
Cabling Information
IC690CBL714A Multi-drop Cable
Purpose
To interconnect Series 90-70 Redundant PLCs in a multi-drop serial communications arrangement.
Specifications
Connector A: DB15F, 15-pin female connector with M3 latchblocks
Connectors B and C: DB15M, 15-pin right angle, male connector with spring clips
Wire: Cable consists of three individually shielded pairs of 22-gauge stranded conductors.
equivalent to Belden #8777.
Jumpers: All jumpers are made of #22 AWG (UL1061) type individual wires.
Length: The length from back of Connector A to entry into Connector B is 6 inches (+/- 0.5
inch). The length from back of Connector C to entry into Connector B is 40 inches (+/- 1.0
inch).
A
Appendix