Filter
Top Products
Preface
iv Series 90™-70 Enhanced Hot Standby CPU Redundancy User's Guide–May 2000 GFK-1527A
Logicmaster 90-70 Programming Software User's Manual
(GFK-0263). A programming software
user's manual for system operators and others using the Logicmaster 90-70 software to program,
configure, monitor, or control a Series 90-70 PLC system.
Series 90-70 PLC CPU Instruction Set Reference Manual
(GFK-0265). Reference manual which
describes operation, fault handling, and programming instructions for the Series 90-70 PLC.
Series 90-70 System Manual for Control Software Users (GFK-1192). Provides an overview of
hardware and software features of the Series 90-70 PLC.
Series 90-70 Remote I/O Scanner User's Manual (GFK-0579). Reference manual for the Remote
I/O Scanner, which interfaces a drop containing Series 90-70 modules to a Genius bus. Any CPU
capable of controlling the bus can be used as the host. This book describes the Remote I/O Scanner
features, configuration, and operation.
Series 90-70 Bus Controller User's Manual (GFK-0398). Reference manual for the bus
controller, which interfaces a Genius bus to a Series 90-70 PLC. This manual describes the
installation and operation of the Bus Controller. It also contains the programming information
needed to interface Genius I/O devices to a Series 90-70 PLC.
Control User’s Guide (GFK-1295). Describes configuration and programming software using
Control Programming. Control software, release 2.1 or later is required to configure Ethernet
Global Data as described in this manual.