Filter
Top Products
35040
Operators Manual
3-24
Figure 3-34. The Ion Chambers Form
EDIT
To modify existing ion chamber parameters, click twice with the mouse on a title within the Ion Chamber
List Box. A form titled “Program Ion Chamber” appears with the parameters of the selected Ion Chamber
and two buttons: OK and CANCEL. Refer to Figure 3-35. The following description of the Parameter
Editor may be followed when editing, appending, or inserting ion chamber parameters.
Figure 3-35. The Program Ion Chamber Form
To modify the Title, Description, or Calibration Factor, click on the desired text box and type in the new
text from the keyboard. To select different Calibration Units, click on the DOWN arrow key and select
another item from the drop down list by clicking on it.