Filter
Top Products
Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual Section 4: Configuration
3-9000-765 Rev H May 2015
Using AMS Device Manager to configure the meter 83
d. Click the All Variables tab to view a graphical display of the Primary, Secondary,
Third and Fourth Variables.
Figure 4-6 AMS Device Manager - Service Tools All
Variables status indicators
8. Click
OK to return to the Overview page.
9. Enable the Write Protect switch on the CPU Module to protect the meter’s
co
nfiguration.
10. From the Overview window, click
Display Meter K-Factors. K-Factors are a read-only
values calculated from the Full scale volumetric flow rate used with frequency outputs
and the Maximum frequency for frequency output.
Figure 4-7 Display Meter K-Factors
Click
Next to return to the Device Manager Overview page.