Filter
Top Products
NurseCall Relay Unit | en 33
Bosch Security Systems User Manual F.01U.252.722 | V1 | 2011.12
A.4 List of criteria
Criterion Number Alarm (A) or Event (E) Comment
ERROR 00 A System malfunction, e.g. component defective
PERSONNEL A 01 E Coded key active (N46)
LOW BATTERY 02 A Battery at low level (Transmitter)
ACK. N46 03 E Acknowledgement (Sent by N46, S35 or S37)
DOOR 04 E Door open or door closed
TECHNICAL 05 A Technical Call (N46)
PERSONNEL C 06 E Coded key presence (N46)
HELP 07 A Call for Help
UNKNOWN 08 E Not used
END PERSONNEL 09 E Removed coded key (N46)
PERSONNEL D 10 E Coded key presence (N46)
ASSISTANCE 11 A Assistance Call
24 HOURS 12 E Daily message check
RESERVE 13 A Reserve Call (N46)
PERSONNEL B 14 E Coded key presence (N46)
RADIO NOISE 15 E Bad radio transmission (noise)
FIRE 16 A Fire Alarm
ACK. TRANSM.1 17 E Acknowledgement (Ack. Transmitter No. 1)
LOCAL ACK. 18 E Local Acknowledgement (Main Unit or Relay Unit)
POWER OUTAGE 19 E Main Unit or Relay Unit not powered
POWER BACK 20 E Power back (Main Unit or Relay Unit)
COMPUTER OFF 21 E Alarm management PC off
COMPUTER ON 22 E Alarm management PC on
BAT.ACK.TRANSM 23 E Battery at low level (One of the Ack. Transmitter)
RELAY ON 24 E Relay Unit connected on RS-485 Bus
RELAY OFF 25 A Relay Unit disconnected from RS-485 Bus
NO RELAY 26 E Relay Unit off acknowledged (Main Unit)
LOW ACCU 27 E Accumulator discharged (Main Unit or Relay Unit)
ACK. TRANSM.2 28 E Acknowledgement (Ack. Transmitter No. 2)
ACK. TRANSM.3 29 E Acknowledgement (Ack. Transmitter No. 3)
ACK. TRANSM.4 30 E Acknowledgement (Ack. Transmitter No. 4)
ACK. TRANSM.5 31 E Acknowledgement (Ack. Transmitter No. 5)
ACK. TRANSM.xx xx E Acknowledgement (Ack. Transmitter No. xx)
ACK. TRANSM.32 58 E Acknowledgement (Ack. Transmitter No. 32)
DEMENTIA 60 A Dementia Alarm
NOTICE!
All events are buffered into the event buffer of the NurseCall Relay Unit. All alarms and events
are sent to the printer/display. All alarms and events except the events "COMPUTER OFF" and
"COMPUTER ON" are sent to the Alarm management Software.