Filter
Top Products
NurseCall Relay Unit Programming | en 23
Bosch Security Systems User Manual F.01U.252.722 | V1 | 2011.12
4.4.2 Selection "None"
if you have selected None, press to confirm.
In this case, there will be no printer/display output. This is the default setting.
4.4.3 Selection "Printer"
if you have selected Printer, press to confirm.
1. Set the printing of all the daily messages sent by transmitters.
2. Scroll with and to select YES or NO. Default value is YES.
3. Confirm with .
4.4.4 Selection "DISPLAY ZETTLER"
if you have selected DISPLAY ZETTLER, press to confirm.
1. Set the rotational display of alarms.
2. Select YES or NO with and . Default value is YES. Confirm with .
3. Set the display of the clock. The format is HH:MM.
4. Scroll with and to select YES or NO. Default value is YES.
5. Confirm with .
6. Configure the display of the 10 identification positions . The outcome is visible at the top.
a. Select a field with and , change a value with and .
b. Confirm with .
¬ RS-232 Output
None £
¬ RS-232 Output
Printer ¡
¬ Printer
24h printed ?:YES ¡
¬ RS-232 Output
DISPLAY ZETTLER ¡
¬ DISPLAY ZETTLER
Rota.of Alarms:YES ¡
¬ DISPLAY ZETTLER
Time displayed:YES ¡
DISPLAY :CR ff rr b
CRITER. 2 + 1 SPACES