Filter
Top Products
20 en | Programming NurseCall Relay Unit
F.01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems
4.2 First use
4.2.1 List of original factory settings
* Locating mode and identification number are set at first use. To change a value, reset the
unit. See Section 4.3.2 Resetting all the parameters and buffers, page 21.
4.2.2 Parameters set by the NurseCall Main Unit
The parameters listed below are programmed in the Main Unit and are applied to the Relay
Unit. See the NurseCall Main Unit user manual.
–Display mode
– Unit language
– Date and time
– Local acknowledgement and the access code
– Output relay function and mode
4.2.3 Locating mode and identification number
1. Disconnect the NurseCall Relay Unit from the RS-485 bus.
2. Switch the NurseCall Relay Unit on with the switch located at the bottom of the unit.
Wait for the following display to appear:
3. Enable (ON) or disable (OFF) the indication of the transmitter position (locating mode)
on the NurseCall Relay Unit display. It must be the same as in the NurseCall Main Unit.
Press to disable or to enable the locating mode.
4. The identification number of the NurseCall Relay Unit must now be attributed.
The identification number is attributed by the NurseCall Main Unit upon connecting the RS-
485 bus corresponds to the order of connection. It can also be set manually. The range for
this value is (A, B, C, ..., Y, Z, a, b, c, d, e, f) for a maximum of 32 Relay Units.
Automatic attribution by the NurseCall Main Unit
5.a. Press or the Red button to erase any previous selection. The black box remains.
5.b. Connect the NurseCall Relay Unit to the RS-485 bus. Press or the Green button to
enable the automatic attribution. The next free identification number is attributed by the Main
Unit and is displayed on the Relay Unit at the bottom right.
Parameter Original Factory Setting Page
* Locating mode On 20
* Identification number No value 20
Assistance and fire priority No 21
Special texts in German No 22
Printer/display setup (Relay Plus Unit only) None 22
Speaker volume Midrange 25
LOCATING ?
(OFF/ON )
RELAY UNIT ID: ·
( + / - )