Filter
Top Products
NurseCall Relay Unit Installation | en 15
Bosch Security Systems User Manual F.01U.252.722 | V1 | 2011.12
3.2.5 Connecting to the mains
The NurseCall Relay Unit is powered by an adaptor (230/10 VAC or 115/10 VAC).
1. Plug the power adaptor into a power outlet placed near the unit. It should be easily
accessible at any time.
2. Connect the cable to the socket labeled 10V AC (1), under the unit.
For connector wiring, see Section A.5.2 Power socket (unit bottom), page 34.
CAUTION!
In case of a different supply, the equipment must fulfill isolation requirements according to
EN60950 standard (last edition).
1