Filter
Top Products
NurseCall Relay Unit Description | en 11
Bosch Security Systems User Manual F.01U.252.722 | V1 | 2011.12
Keys Function
Access to the printer/display setup (Relay Plus Unit only)
See Section 4.4 Printer/display setup on the Relay Plus Unit, Page 22.
Increase the volume of the loudspeaker.
See Section 5.1 Adjusting the loudspeaker volume, page 25.
Decrease the volume of the loudspeaker.
See Section 5.1 Adjusting the loudspeaker volume, page 25.
Scroll down to the previous alarm/event.
See Section 5.2 Consulting the alarm or event buffer, Page 25.
Scroll up to the next alarm/event.
See Section 5.2 Consulting the alarm or event buffer, Page 25.
Confirm a value or a command.
Cancel an entry or a command.
Check the status of the backup battery.
See Section 6.3 Monitoring the backup battery, page 28.
Not used.
to
Enter a value, such as special codes.
See Section 4.3 Special settings, Page 21.
Not used.
Not used.
Enter a value or launch the event/alarm display mode.
See Section 5.2.1 Switching between alarm and event buffers indication,
Page 26.
then
Lock and unlock the keyboard.