Filter
Top Products
NurseCall Relay Unit Programming | en 19
Bosch Security Systems User Manual F.01U.252.722 | V1 | 2011.12
4 Programming
4.1 Generalities
4.1.1 Using the keyboard
Open the cover carefully and use the keyboard.
To access the special settings programming, press three times quickly.
See Section 4.3 Special settings, page 21 for more details.
4.1.2 Exit and cancel entries
Press once or several times.
4.1.3 Key not allowed
If you have pressed a key by mistake during the programming, a high-pitched beep is
generated.
4.1.4 Locking and unlocking the keyboard
Press then within one second to lock or unlock the keyboard.
This function locks only the keyboard to prevent any false manipulation. The colored buttons
on the left hand side are still available.
When the keyboard is locked, a small lock appears at the bottom right of the display:
4.1.5 Programming time-out
Programming of the NurseCall Relay Unit terminates automatically if no entries are made
on the keyboard for more than one minute.
C
OK
OFF
P
T
ON
DATE: 03.01.12 ¨
TIME: 12:12:31 ½A