Filter
Top Products
18
Installing Batteries…
Two 3-volt lithium batteries (size 2032)
come already installed in your Meter.
Batteries should be replaced when the
Meter continually displays the battery
symbol.
Note: After replacing batteries, you
will need to reset the time (see
page 13).
1. Press firmly on battery cover and
slide in the direction of the arrow
to open the cover.
2. Place new batteries under the
blue prongs and into the battery
compartment with the “+”
side up.
Slide cover back into place, lining
up with open slots, and close firmly. Test results stored in the
memory are not erased when batteries are changed. The
date, units of measure and other formatting choices do not
need to be reset.
WARNING: Keep batteries away from children. Lithium batteries are
poisonous. If swallowed, immediately contact your physician or poison
control center. Discard batteries according to your local environmental
regulations.