A SERVICE OF

logo

NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
50 www.netcomm.com.au
3.3.2 Management > Factory Reset
Click the Reset button to set all configurations to factory default.
(Please push the reset button at the rear side of the gateway for 7 seconds to reset the gate-
way.)
The default values of your NB600W are:
User Name: admin
Password: admin
WAN/Internet Port: DHCP client enabled
Local IP address: 192.168.1.1
Subnet mask: 255.255.255.0
DHCP server: Enable
DHCP start address: 192.168.1.2
Number of DHCP clients: 128
Wireless: Enabled
SSID: NB600W
Channel: 11
Operation Mode: 802.11b/g mixed
WEP security: No
Remote Management: Disable
UPnP: Disable