A SERVICE OF

logo

NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
18 www.netcomm.com.au
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Proto-
col (TCP/IP), and click the Properties button.
4. Select Obtain an IP address automatically. Once the new window appears, click the OK
button. Click the OK button again to complete the PC configuration.
After you have obtained an IP address, please access the Gateway by typing http://192.168.1.1
to configure the Gateway. (If you have changed the Gateway’s IP address, please type
http://<the new IP address of the gateway>.)