A SERVICE OF

logo

NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
10 www.netcomm.com.au
1.6.1 Log-in
User Name
The default username of the NB600W is “admin”.
Password
The default password of the NB600W is “admin”. It is highly recommended that you setup
your own password to prevent unauthorized access to the Gateway’s settings.
First time login
You can directly access the configuration manager home page after you enter the IP address:
192.168.1.1 and the default username and password.
Forgot your password?
If you forget the password, you can reset the device to its factory setting. Press the “Reset”
button on the back panel of the NB600W Gateway. Hold the button in at least 10 seconds. The
NB600W will revert to its default settings. Then, you can configure the Gateway again.
Security
It is recommended that you change the admin password and disable wireless, remote man-
agement and UPnP until you require these functions or you take suitable security measures
(e.g. Set WEP Keys).