NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
22 www.netcomm.com.au
PPPoE Configuration
Most DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish an Inter-
net connection. If you are connected to the Internet through a DSL line, check with your ISP to
see what protocol they use.
Field Description
Host Name/Domain Name ISPs generally require the host name and domain
name as identification. If these are not required, as-
sign on your own or leave blank.
User Name Enter your username.
Password &Confirm Password Enter your password and confirm again in the fields
for the login to the ISP.
Service Name Enter the ISP specified service name or assign one of
your own if the Service Name is not specified.
Packet Size (MTU) The Maximum Transmission Unit of an IP packet.
The default value is 1492 Bytes. If your ISP requires
a special value, please select from the pull down
menu. The default value will work for most cases.
Otherwise, contact your ISP for the MTU value.
Disconnect after idle time The PPPoE connection will be disconnected by the
gateway automatically when there is no Internet
traffic for the idle time specified. The idle time of “0”
means an always-on connection. The default value is
“0” minute.
