NB600W Super-G Wireless Broadband Gateway User Guide YML775 Rev1
24 www.netcomm.com.au
Static IP Configuration
If you connect to the Internet using a permanent IP address, please select Static IP Configu-
ration from the pull down menu and fill the ISP specified values in the fields.
Note: If your ISP requires a PPPoE type connection, you should NOT use “ Static IP
Config”.
Field Description
Host Name/Domain Name Some ISPs require the host name and domain name
as identification. If it is not specified, assign on your
own or leave it as blank.
IP Address Enter the IP address of the gateway’s Internet port.
Please use the ISP specified address.
Subnet mask Enter the subnet mask supplied by your ISP.
Gateway Your ISP will assign a gateway address for you. If
you can not find one, please contact your ISP.
Primary DNS Enter the domain name server of the ISP.
Secondary DNS The back up domain name server can be left blank if
necessary.
MAC address Some ISPs allow you to connect to them with a
specified MAC address only. You can enter the
MAC address manually or copy it from a PC which
is attached to the Local Port. Simply type in its IP
address and the gateway will copy the MAC address
from that PC. The gateway comes with the factory
default MAC address. You do not need to change
the default value if the ISP is not checking the MAC
address of your Internet Port.
