YML775 Rev1 NB600W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au 21
DHCP Configuration
The DHCP is the default service for the Internet Port section. This means that you will get the
IP address from the ISP automatically. Choose this type of Protocol for Optus Cable also.
Field Description
Host Name/Domain Name Some cable ISPs require the host name and domain
name as identification. You may have to check with
your ISP to see if your broadband Internet service
has been configured with a host and domain name. In
most cases, you can assign your own or leave it blank
and it will work.
Use Static DNS If you want to use your own DNS instead of the one
provided by your ISP, check this box, and type the IP
address of the DNS in the field. (At least one in the
primary field.)
MAC address Some ISPs require a specific MAC address. You can
enter the MAC address manually or copy it from a
PC which is attached to the Local Port. Simply type
in its IP address and the gateway will copy the MAC
address from that PC. The gateway comes with the
factory default MAC address. You do not need to
change the default value if the ISP is not checking the
MAC address of your Internet Port.
