YML775 Rev1 NB600W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au 27
3.1.2 Local Port
Configure your gateway’s Local Port IP address here. The Local Port must be a private IP ad-
dress. (10.x.x.x, 192.x.x.x are reserved for LAN use).
Field Description
Subnet Mask The subnet mask determines the number of com-
puters that are allowed in this network. A class C
network with the subnet mask 255.255.255.0 allows
maximum 253 users (the gateway is already using the
192.168.1.1) in your local area network. Usually a
class C network is satisfactory for a local network.
DHCP server To enable the DHCP server, please click the check
box. The DHCP server assigns dynamic IP address to
the clients.
Start IP address Specify the start of the IP address for DHCP users.
The default value is 192.168.1.2. (Please make sure
there is no fixed IP address within the range you as-
signed here on the LAN, otherwise the DHCP client
cannot get the IP address correctly.)
Number of IP address Assign the number of users allowed to use the DHCP
service. The default value is 128 users.
