A SERVICE OF

logo

2-12
Making Measurements
Changing the Units and Measurement Rate
Changing the Units and Measurement Rate
This section includes step-by-step instructions for changing the units
and measurement rate.
This section includes:
Displayed units 2-12
Measurement rate 2- 13
Continuous or single measurements 2-14
Displayed units
As described below, it’s easy to change the wavelength and amplitude
units. You can choose between the following units:
To change the units of measure
1 Press Setup.
2 Press the MORE softkey.
3 Press the UNITS softkey.
Table 2-1. Available Units
Wavelength (Frequency) Power
nm dBm
cm
1
mW
THz
µW