Filter
Top Products
In stall the new scraper along with the hold ing plate.
Tighten down the 3 plas tic screws. Make sure that the strip per is fit ted par al lel to the dos ing plate.
F
Use only plas tic screws (DT-t: metal screws).
In stall the dos ing con tainer along with the dos ing hop per on the dos ing hous ing (pay at ten tion to
the guide pins).
F
Mount the tight en ing strap.
Mount the screwat the tight en ing strap.
Ob serve that a dos ing and blend ing unit may only be put into op er a tion if
all dos ing sta tions and cov ers are in place. Dan ger of squeez ing!
&
Or der num bers
Plas tic screws: ID 96039
Scraper: ID 05334
Holding plate: ID 05353
Dosing disc
20 cham bers: ID 23056
12 cham bers: ID 23060
10 cham bers: ID 18405
176-1MS
SDD 1 SGM
Main te nance 4-12