Filter
Top Products
3.4.3. Pre pa ring the Feed Sta ti on for Nor mal Ope ra ti on
The de vice may only be started up if all com po nents have been prop erly
in stalled. Dan ger: Limbs may be caught in ma chin ery!
Stan dard Feed Sta ti on
Open the sa fe ty screws at the tog gle-type fas te ner.
Open the two tog gle-type fas te ner at the do sing mo tor.
Lift the feed sta ti on from the do sing mo tor and turn the feed sta ti on (180°) so that the out put points
away from the mi xing hop per.
Put the feed sta ti on back on the do sing mo tor.
F
Clo se the tog gle-type fa ste ners.
Mount the sa fe ty screws.
Feed Sta ti on with In ter me di ate Pie ce for Pro por tio ning
Re mo ve the weig hing con tai ner.
Mount the blind lid at the in ter me di ate pie ce for pro por tio ning.
Co lor blend S feed sta ti on
The de vice may only be started up if all com po nents have been prop erly
in stalled. Dan ger: Limbs may be caught in ma chin ery!
Turn the feed sta tion approx. 45° clock wise.
Lift the feed sta tion from the dos ing mo tor and turn the feed sta tion so that the out put of the dos ing
disc is lo cated over the div ing hose in the hop per piece.
Put the feed sta tion back on the dos ing mo tor (pay at ten tion to the guide pins).
Press the feed sta tion on the dos ing mo tor and turn the feed sta tion approx. 45° coun -
ter-clockwise.
176-1MS
S 150
Put ting into op er a tion 3-16