Filter
Top Products
In stalling the dos ing sta tion
Place the dos ing disc in the dos ing unit hous ing.
Re move the screw (M6 x 60).
Screw the dos ing disc in place by means of 2 hexa gon socket screws (M6 x 30).
Mount the cen ter hexa gon socket screw (M6 x 12).
In stall the scraper and then the dos ing unit.
Turn the dos ing disc to check for smooth move ment.
Po si tion the dos ing hop per on the dos ing unit.
Tighten the tight en ing strap.
Ob serve that a dos ing and blend ing unit may only be put into op er a tion if
all dos ing sta tions and cov ers are in place. Dan ger of squeez ing!
176-1MS
SDD 1 SGM
Main te nance 4-7