Filter
Top Products
M3860A/M3861A HEARTSTART FR2+
D-4
Philips Medical Systems
rhythm analysis ...................... See “SMART analysis.”
send (data) ............................. A feature of the HeartStart FR2+ that allows use of its infrared (IR)
communications port to send data directly to another FR2+ or a computer
running HeartStart Event Review Web software.
sensitivity ................................ A measure of the ability of the HeartStart FR2+ to reliably detect and identify
shockable heart rhythms.
setup ........................................ The settings of all programmable operating parameters of the HeartStart
FR2+. The factory default setup can be modified using the M3864A training
& administration pack.
shock series ........................... One or more shocks, each separated by no more than a preset time
(programmed Protocol Timeout). After completion of a shock series, the
HeartStart FR2+ automatically pauses for CPR.
shockable rhythm .................. Ventricular fibrillation and certain ventricular tachycardias associated with
sudden cardiac arrest.
shock waveform ..................... See “SMART biphasic waveform.”
SMART analysis ...................... The proprietary algorithm used by the FR2+ to analyze the patient’s heart
rhythm and determine whether a shock is advised.
SMART biphasic
waveform
............................ The patented, low-energy defibrillation shock waveform used by the FR2+. It
is an impedance-compensated biphasic waveform with 150 Joules, nominal,
delivered to a 50 ohm load. When delivered via FR2 infant/child
reduced-energy defibrillator pads, the energy is attenuated to 50 Joules,
nominal.
specificity ................................ A measure of the ability of the HeartStart FR2+ to reliably detect and identify
non-shockable heart rhythms.
standard battery...................... The M3863A battery, 12 VDC, 4.2 Ah, lithium manganese dioxide,
disposable, long-life primary cell.
standby mode ........................ The operating mode of the HeartStart FR2+ when a battery has been
installed, and the unit is turned off and ready for use when needed. Shown by
flashing black hourglass on the Status Indicator.
status indicator ...................... This is a special window in the upper right-hand corner of the front panel of
the HeartStart FR2+ that lets you know the status of the device.
sudden cardiac
arrest ................................... The sudden cessation of the heart’s pumping rhythm.