Filter
Top Products
A - 3
[Installation Precautions]
[Wiring Precautions]
CAUTION
● Be sure to shut off all phases of the external supply power used by the system before mounting/
removing a module.
Not doing so may result in damage to the product.
● When mounting a module, make room for 5cm (1.97 inch) or more at above and below of the module
for ventilation.
When powering ON a contact at 3A or more consecutively, make room for 5mm (0.20 inch) or more
at the sides of the contact for ventilation.
● Do not directly touch the module's conductive parts or electronic components.
Doing so may cause malfunctions or a failure.
● Securely connect connectors for each cable to the applied parts.
Not doing so may cause a malfunction due to poor connection.
WARNING
● Be sure to shut off all phases of the external supply power used by the system before wiring.
Not completely turning off all power could result in electric shock or damage to the product.
● When energizing or operating the module after installation or wiring, be sure to close the attached
terminal cover.
Not doing so may result in electric shock.