Filter
Top Products
25
Test Reminder
A test reminder message is provided for prompting the subscriber to
perform a system test. They will be prompted to activate their emergency
transmitter or press the HELP button on the Console. Either activation
will send a test report to the Central Station.
✲ IMPORTANT: IF USING THE TEST REMINDER MESSAGE FEATURE,
TWO-WAY AUDIO SHOULD BE ENABLED SO THAT THE CENTRAL
STATION CAN ACKNOWLEDGE THE TEST WITH THE SUBSCRIBER.
When the programmed system test time occurs, a reminder chime
sounds and the Console announces:
0 “Attention... It is time to test your personal emergency
system... Please press your personal help button”
✓ NOTE: The test announcement will repeat every three minutes regardless
of the AUDIO REPLAY DURING TIMEOUT reminder message setting.
When the subscriber activates their emergency transmitter or presses
the HELP button, the Console will send a test report to the Central
Station, then start a two-way audio session. The Central Station operator
typically acknowledges the test report with the subscriber using two-way
audio, then disconnects.
If the subscriber does not activate a transmitter or press the HELP button
before the reminder timeout interval has been reached, an automatic test
report will be sent to the Central Station.
✓ NOTE: If the system test reminder times out and an automatic status
report is sent, a two-way audio session will NOT be started, even if
two-way audio is enabled.
Creating or Editing Reminder Messages
Use the following steps to setup a reminder message. Different options
will be displayed depending on the type of message.
1. Choose a reminder message type.
2. Select One Time, Daily, Weekly, or Monthly for the Schedule Type.
3. Select the date(s) and time(s) that the reminder message will sound.
4. For ride or appointment messages, select the time for the ride or
appointment to announce during the message.
5. Check the SLOT ENABLE check box to enable the reminder message
time slot. The schedule displayed for the time slot will be grayed until
it is enabled.
6. Check the SEND REPORT check box to have the Console send a
report if this reminder message is not acknowledged. (Global missed
reminder reports must be enabled also.)
"ATTENTION... IT IS TIME TO TEST YOUR
PERSONAL EMERGENCY SYSTEM....
PLEASE PRESS YOUR PERSONAL HELP BUTTON"
- OR -
THE SUBSCRIBER ACTIVATES
A PORTABLE TRANSMITTER
THE SUBSCRIBER PRESSES
THE HELP BUTTON
WHEN A TEST REMINDER
MESSAGE OCCURS...
THE CONSOLE
ANNOUNCES
THE CONSOLE WILL SEND
A TEST MESSAGE TO
THE CENTRAL STATION
Acknowledging a System Test Reminder Message