Filter
Top Products
53
Leica VT1200 and VT1200S – Microtome
9.1.7 Installing the Magnifier Support or Microscope Support
Fig. 49
2
3
4
• First, remove the cover (3) from the basic in-
strument and store it in a safe place.
• Insert the provided Allen screws (a) into the
hole (4) in the bearing bush. Use the size 3
Allen key to screw the screws into the open
slot on the top side of the basic instrument.
• Push the magnifier support or microscope
support into the bearing bush as far as it will
go.
• Adjust the magnifier to the desired inclination
angle and screw in the screw (2) using the size
3 Allen key.
- Insert the S6 stereozoom micro-
scope into the ring holder and
attach it by screwing it
down.
Fig. 50
a
Fig. 48
9. Ordering Information for Optional Accessories, Consumables and Spare Parts