Filter
Top Products
16
Operating Manual V1.1 – 05/2007
4.2 Packing and Setting up the Instrument
4. Installation
1. Have 2 people grab the instrument by the transport handles (1), place it
on the wooden pallet and screw it to the pallet using the 4 size 6 hexa-
gon-head screws (2).
2. Pull the transparent protective hood (3) over the instrument. Place the
wooden box (4) on the baseplate. Insert the inner carton ring (5).
3. Insert the accessory box (6 – contains accessories) and fill it with pack-
ing material (7).
4. Attach the cover (8) and screw it into place using 8 Phillips screws (9).
1
1
2
2
Packing the instrument
➜
3
5
4
➜
➜
➜
6
7
8
9
9
Fig. 12
Ensure that the instrument is standing on a work surface that is as free
of vibrations as possible.
Before each transport, the handles must be screwed onto the instrument using the
provided screws (see p. 17, Fig. 13). Check to ensure that the handles are firmly in
place and will hold reliably!