Filter
Top Products
30
Operating Manual V1.1 – 05/2007
5. Working with the Instrument
semiautomatic sectioning mode
➞ Rotary knob 2
Mode: Choice between AUTO and
MAN with rotary knob 1; for
semiautomatic sectioning mode,
MAN must be selected.
➞ Rotary knob 2
Stroke type (CUT) – only single
stroke (SINGLE) can be selected
with rotary knob 1. If continuous
stroke (CONT) is selected, an audi-
ble warning signal sounds.
➞ Rotary knob 2
Specimen retraction (RETRACT)
cannot be set.
Value cannot be
changed. NO automat-
ic retraction is possi-
ble in semiautomatic
sectioning mode.
➞ Rotary knob 2
The LED illumination can be adjust-
ed to 5 different levels of brightness
using rotary knob 1.
Key/setting dial automatic sectioning mode
➞ Rotary knob 2
Mode: Choice between AUTO and
MAN with rotary knob 1; for the
automatic sectioning mode, AUTO
must be selected.
➞ Rotary knob 2
Stroke type (CUT): Choice between
single stroke (SINGLE) and contin-
uous stroke (CONT) with rotary
knob 1.
➞ Rotary knob 2
The specimen retraction (RETRACT)
can be set from 0 – 100μm in 10 μm
increments with rotary knob 1.
ditto
1
2
1
2
1
2
1
2