Filter
Top Products
24
Operating Manual V1.1 – 05/2007
5. Working with the Instrument
Key/setting dial semiautomatic sectioning mode
The blade feed rate can be adjusted
from 0.01 – 1.5 mm/s:
0.01
–
0.1 in 0.01 mmm/s increments,
0.10
–
0.5 in 0.02 mmm/s increments,
0.50
–
1.5 in 0.10 mmm/s increments.
Adjusting the amplitude from
0
–
3 mm in 0.05 mm increments
Not possible.
Display for the current specimen
holder position (lowest position =
0 μm, uppermost position = 20,000μm.)
You can reset the display to zero at
any point using the CLEAR/
∑∑
∑∑
∑μm key.
The section thicknesses are then
added in the
∑∑
∑∑
∑μm display.
automatic sectioning mode
ditto
ditto
Setting the section thickness for
automatic mode – max. 1000μm.
ditto
1
1
1