Filter
Top Products
34
6. Startup
Fig. 37 Display after initialization
• Switch-on the microscope at the power
switch (34.1,36.1). All motorized microscope
components first undergo an initialization
phase.
After initialization is complete, the display on the
stand shows the current microscope setting (Fig.
37).
The microscopic components such as dia-
phragms, condenser, light and phase rings are
already pre-centered in the factory. However,
re-centering may be necessary due to transpor-
tation and assembly.
Before proceeding with the necessary steps,
first familiarize yourself with the stand’s display
and control panel.
Caution:
After turning on the gas discharge lamps, the
burner must be immediately adjusted. There-
fore, do not turn on the power supply unit
yet. First, work in transmitted light in order to
familiarize yourself with the microscope’s
controls.
6.3 The Display (Leica DM4000 B/DM4000 M)