Filter
Top Products
19
5. Assembly
5.3 Tube and Eyepieces
The tube is mounted to the stand either directly or
with the use of intermediate modules. It is fastened
in place with the side clamping screw (9.1).
• Loosen the clamping screw (9.1).
• Insert the tube in the circular receptacle
(dovetail ring).
• Retighten the clamping screw (9.1).
•
Only for the MBDT motorized tube:
Connect the tube to the stand with the con-
nector socket (10.1).
• The eyepieces are inserted into the eyepiece
tubes on the tube.
6.4 Objectives
The receptacles on the objective turrets are
numbered (Fig. 11). The individual objectives
have already pre-assigned positions at the
factory according to their configuration.
A list of the exact objective positions is provided
in shipment. (“Identification Sheet”)
Caution:
Cover unoccupied threads on the turret with
dust protector caps!
Fig. 9 Fastening the tube
1 Clamping screw
1
Fig. 10 Motorized tube connection
1 Connector socket
1
Fig. 11
Objective turret
with labeled
objective
receptacles
!