Filter
Top Products
29
5. Assembly
Ergomodule
For raising the eye level of the tube opening, the
ergomodule may be used.
It is fastened in place with the side clamping
screw.
Mirror Housing
• Place the mirror housing directly onto the
lamp housing receptacle on the back of the
stand and attach it using the side clamping
screw.
• Place the lamp housing onto the mirror hous-
ing and fasten it using the corresponding
clamping screw on the side.
Booster Lens / Excitation Manager
Fig. 32
1 Insert of Booster Lens
Fig. 33
1 Insert of Excitation Manager
• Remove the clamping ring from the filter slide.
• Insert the Booster Lens or Excitation
Manager.
• Push the cover back.
• Insert the clamping ring.
• Insert the filter slide into the front receptacle
on the right side of the stand (32.1, 33.1).
• Using two filter sliders, the Excitation
Manager can be inserted into the back
receptacle.
5.11 Connection to the Power Supply
1
1