4
CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
Speaker
A built-in speaker is located in the right panel when the
monitor is viewed from the front.
MENU button
Displays and turns off the menu screens.
Notes:
● There are two menu screens: the <MAIN MENU>
screen and the <SET-UP MENU> screen.
● To display the <MAIN MENU> screen, press the MENU
button.
● To display the <SET-UP MENU> screen, when no menu
screen is displayed, press the VOLUME/ENTER (–)
button while pressing the SELECT (
∞
) button.
● To select an item in a menu screen, press the SELECT
(
∞
) button.
● To set or adjust a selected item in a menu screen, press
the VOLUME/ENTER (–/+) buttons.
SELECT (
∞
) button
Selects an item in a menu screen. Each time the SELECT
button is pressed, the selection mark moves to the next
item below.
POWER switch/POWER indicator
Monitor power switch and power indicator. Press the
POWER switch to turn the power ON or OFF.
* When the monitor is ON, there is a slight delay before
the picture appears while the monitor runs a self-test.
1
PHASE
DT-V2000SU
CHROMA BRIGHT CONTRAST
MENU SELECT
ABC
INPUT SELECT
POWER
ON
OFF
VOLUME/ENTER
2
1
43
7
6 5
PHASE
DT-V2000SU
CHROMA BRIGHT CONTRAST
MENU SELECT
ABC
INPUT SELECT
POWER
ON
OFF
VOLUME/ENTER
INPUT SELECT buttons
Select the video signal input to each terminal.
Ⅵ Input A button [INPUT A (RGB/COMPO.)]
Selects the video signal input to the INPUT A (RGB/
COMPO.) terminal. When selected, the INPUT A
indicator lights in green.
Ⅵ Input B button [INPUT B (VIDEO)]
Selects the video signal input to the INPUT B (VIDEO)
terminal. When selected, the INPUT B indicator lights
in green.
Ⅵ Input C button [INPUT C (RGB)]
Selects the video signal input to the INPUT C (RGB)
terminal. When selected, the INPUT C indicator lights
in green.
VOLUME/ENTER (–/+) buttons
Adjust the speaker volume. Also used to set or adjust an
item in a menu screen.
Picture adjustment knobs
Adjust the picture hue (PHASE), chroma (CHROMA),
brightness (BRIGHT) and contrast (CONTRAST).
* For details, refer to page 9.
2
3
4
5
6
7
00.12.20, 0:39 PM4