Filter
Top Products
16
Power Save Function
Mode Normal Standby Suspended
Mode Mode Mode
Power 100% Less than Less than
Consumption about 90% about 30%
Power Lit Lit Blinks
Indicator
( )
Shift Time — About 15 About 15
from Normal seconds seconds
Mode
Return Time — Immediate About 10 to
to Normal 15 seconds
Mode
ⅥPOWER SAVE FUNCTION
How the Power Save Function Operates
●Horizontal synchronization signal vanishes.
≠
The “NO SYNC” indication is displayed and about 10
seconds later the “POWER SAVE” indication is displayed
(for about 15 seconds).
≠
The monitor enters standby mode.
(When the horizontal synchronization signal is detected
again, the monitor resumes normal operation (the picture
reappears).)
●Horizontal/vertical synchronization signals vanish.
≠
The “NO SYNC” indication is displayed and 10 seconds
later the “POWER SAVE” indication is displayed (for about
15 seconds).
≠
The monitor enters suspended mode.
(When the horizontal/vertical synchronization signals are
detected again, the monitor resumes normal operation (the
picture is displayed) after about 10 –15 seconds.)
The following shows the power indicator lighting and power
consumption savings when the power save function is
used.
This monitor has a power save function. For example, if the
power is turned on with no signal input or the signal input is no
longer detected, the power save function puts the monitor into
signal-waiting mode (the screen goes out).
The power save function is set in the <SET-UP MENU> screen.
The power save function is available only with INPUT C signals and
only when the monitor is connected to a computer which has a power
management function that conforms to the VESA standard.
1 While pressing the
SELECT
SELECT
button, press
the VOLUME/ENTER
button.
The <SET-UP MENU> screen
appears.
2 Press the SELECT
SELECT
button to select the
[POWER SAVE] item.
The selection mark (
4
) moves to
the [POWER SAVE] item.
3 Perform adjustment with the VOLUME/
ENTER
/ buttons.
ON : The power save function is turned on.
OFF : The power save function is turned off.
4 After adjustment is complete, press the
MENU
MENU
button to exit the menu screen.
POWER SAVE FUNCTION SETTING
<SET-UP MENU> screen
HOW TO PERFORM SET-UP MENU
ADJUSTMENTS
<SET-UP MENU> screen
Notes:
● The power save function is available only with INPUT C
signals and only when the monitor is connected to a
computer which has a power management function that
conforms to the VESA standard.
● The power save function cannot be set when the [POWER
SAVE] item is not displayed, such as when the selected
input mode (INPUT SELECT) is INPUT A or INPUT B.
● Items that cannot be set or adjusted in the current input
mode (INPUT SELECT) are not displayed.
● When external remote control is activated, the power save
function is turned off.
● The power save function factory-set value is “ON.”
Note:
To exit from the power save mode, perform one of the
following. (Note: if the operating conditions are the same as
what they were in the power save mode, the power save
mode will be reactivated after about 30 seconds.)
• Input signals (vertical/horizontal synchronization signals)
from the computer to the monitor correctly,
• Cancel the power save mode by operating the computer,
• Operate the control buttons on the front of the monitor,
• Disconnect the power cord from the AC outlet and reconnect
it.
00.12.20, 0:39 PM16