Filter
Top Products
19
Ⅵ SELECTING [ sub menu] IN PROCEDURE 4
You can also adjust items in procedure 5 with only the
selected item displayed. Use this if the full menu screen
makes it difficult to observe the monitor image.
1Select the [ sub menu] item in procedure 4.
2Press the VOLUME/
ENTER
button.
The <sub menu> screen appears.
(A single item is displayed at a
time.)
3Press the SELECT
SELECT
button to
select the desired item.
4Perform adjustment with the
VOLUME/ENTER /
buttons.
Ⅵ RESETTING ITEMS TO THEIR FACTORY-SET (INITIAL)
VALUES
You can reset the <WHITE BALANCE> items to their
factory-set (initial) values.
1Select the [reset] item in procedure 4.
2Press the VOLUME/ENTER
button.
The <reset> screen appears.
3Perform adjustment with the
VOLUME/ENTER
button
or the MENU
MENU
button.
VOLUME/ENTER
button… Values are reset.
MENU button
MENU
… Reset is aborted
(values are unchanged).
* The screen from procedure 4 reappears.
6 After adjustment is complete, press the
MENU
MENU
button twice to exit the menu
screen.
Notes:
● The menu screen automatically disappears when no
operation is performed after about 30 seconds.
● When a prompt appears in the menu screen, it does not
disappear until the operation requested is performed.
● Items that cannot be set or adjusted in the current input
mode (INPUT SELECT) are not displayed.
<sub menu> screen
You can reset all the items in the <MAIN MENU> screen and
<SET-UP MENU> screen to their factory-set (initial) values.
This function (all reset) is set in the <SET-UP MENU> screen.
1 While pressing the
SELECT
SELECT
button, press
the VOLUME/ENTER
button.
The <SET-UP MENU> screen
appears.
2 Press the SELECT
SELECT
button to select the
[
all reset] item.
The selection mark (
4
) moves to
the [
all reset] item.
3 Press the VOLUME/
ENTER
button.
The <all reset> screen appears.
4 Perform adjustment with the VOLUME/
ENTER
button or the MENU
MENU
button.
VOLUME/ENTER button… All the items are reset to
their factory-set (initial)
values.
MENU
MENU
button … All-reset is aborted
(values are unchanged).
* The screen from procedure 2 (the <SET-UP MENU> screen)
reappears.
5 After adjustment is complete, press the
MENU
MENU
button to exit the menu screen.
RESETTING ALL MENU ITEMS TO
THEIR FACTORY-SET (INITIAL)
VALUES
<SET-UP MENU> screen
<SET-UP MENU> screen
Notes:
● All the menu items are reset. If there are items you do not
want to reset, cancel <all reset>.
● The menu screen automatically disappears when no
operation is performed after about 30 seconds.
● When a prompt appears in the menu screen, it does not
disappear until the operation requested is performed.
<reset> screen
<all reset> screen
00.12.20, 0:39 PM19