Filter
Top Products
15
Ⅵ Recommended Input Mode List
Mode Resolution Horizontal Vertical Preset
Frequency Frequency
Horizontal
Vertical (kHz) (Hz)
NTSC 786 243 15.73 29.97 (i) ⅷ
480i 720 244 15.73 29.97 (i) ⅷ
480p 720 483 31.469 59.94 ⅷ
720p 1280 720 44.955 59.94 ⅷ
1080i 1920 540 33.75 30.00 (i) ⅷ
VGA480 640 480 31.47 59.94 ⅜
VESA600A 800 600 35.16 56.26 ⅜
(S-VGA)
MAC16 832 624 49.41 74.52 ⅜
VESA768B 1024 768 56.47 70.06 ⅜
(S-VGA)
VGA350 640 350 31.47 70.08 ⅜
VGA400 640 400 31.47 70.08 ⅜
S-VGA 800 600 48.08 72.19 ⅜
8514A 1024 384 35.52 43.48 (i) ⅜
VESA400 640 400 37.88 83.43 ⅜
VESA480 640 480 37.88 72.84 ⅜
VESA600B 800 600 37.88 60.32 ⅜
VESA600C 800 600 48.08 72.19 ⅜
VESA768A 1024 768 48.38 60.02 ⅜
MAC2 640 480 35.00 66.67 ⅜
(MAC13)
S-MAC 1024 768 48.78 59.56 ⅜
(MAC19)
If the monitor is placed too close to a speaker or other device
incorporating a magnet, or if it is moved with the power on,
irregular color may appear on the screen. If this happens,
activate the degaussing circuit to degauss the picture. This
circuit will remove the irregular color from the screen.
1 Press the MENU
MENU
button.
The <MAIN MENU> screen appears.
2 Press the SELECT
SELECT
button to select the
[DEGAUSS] item.
The selection mark (
4
) moves to
the [DEGAUSS] item.
3 Press the VOLUME/
ENTER
button.
The degaussing circuit is activated
and the <DEGAUSS> screen
appears.
DEGAUSSING THE SCREEN
* The “ⅷ” symbol indicates factory-set modes.
* The “⅜” symbol indicates recommended timing modes.
* The “(i)” symbol indicates interlacing.
* Macintosh™ and Power Macintosh™ are registered trademarks
owned by Apple Computer Inc. (America).
* IBM
®
and VGA are registered trademarks owned by International
Business Corporation (America).
* VESA
®
is a registered trademark owned by Video Electronics
Standard Association.
* Windows
®
is a registered trademark owned by Microsoft Corporation
in America and other countries.
* All other product names are the brands or the registered trademarks
of their respective holders.
Notes:
● The input modes shown in the table above are recommended.
● When using signals that do not conform to any factory-set
signal mode, you should adjust the width or position of the
picture horizontally or vertically as required.
For details about adjustment, refer to pages 10 and 11,
“HOW TO PERFORM MAIN MENU ADJUSTMENTS.”
<MAIN MENU> screen
<MAIN MENU> screen
<DEGAUSS> screen
Notes:
● When the power of the monitor is turned on, the degaussing
circuit is automatically activated.
● Do not place a floppy disk or credit card close to the
monitor. The magnetic field generated by the monitor may
erase its contents.
● When degaussing the screen by manually activating the
degaussing circuit, wait more than 30 minutes to gain the
best effect. (The shorter the interval is, the less effective
degaussing is.)
* The <DEGAUSS> screen indication automatically
disappears after about three seconds, and degaussing
is complete after about 10 seconds.
00.12.20, 0:39 PM15