Support User Manuals

Invacare RPS350-2 Mobility Aid User Manual

Open as PDF

of 40

MAINTENANCE

Stand Up Lift Model RPS350-2 36 Part No. 1145811

Replacing Casters/Forks

Replacing Rear Casters

NOTE:Forthisprocedure,refertoFIGURE 7.7

1. Placetheliftonitsside.

2. Removetheboltandlocknutthat

securetheexistingrearcastertothe

fork.

NOTE:Thebushingwillbelooseandmayfall

outofthecaster.

NOTE:Existingbushingwillbereused.

Examineandreplaceifworn.

3. Installthenew/existingbushinginto

thenewrearcaster.

4. Lineupthemountingholesinthenew

rearcasterandthefork.

5. Installtheboltthroughtheforkand

newrearcasterandtightensecurely

withthelocknut.

FIGURE 7.7 Replacing Rear Casters

Replacing Front Casters

NOTE:Forthisprocedure,refertoFIGURE 7.8.

1. Placetheliftonitsside.

2. Removetheboltandlocknutthatsecuretheexistingfrontcasterassemblytothefork.

NOTE:Thefrontcasterassemblyconsistsoftwocastersandawasherinbetween.

NOTE:Thewasherwillfalloutfrombetween

thetwocasters.

NOTE:Washerwillbereused.Examineand

replaceifworn.

3. Positionthenew/existingwasher

betweenthetwonewcasters.

4. Lineupthemountingholesinthenew

frontcasterassemblyandthefork.

5. Installtheboltthroughtheforkandthe

newfrontcasterassemblyandtighten

securelywiththelocknut.

FIGURE 7.8 Replacing Front Casters

Base

Fork

Bolt

Bushing

Rear Caster

Locknut

Base

Fork

Bolt

Washer

Front Casters

Locknut

previous next