Support User Manuals

Invacare RPS350-2 Mobility Aid User Manual

Open as PDF

of 40

MAINTENANCE

Part No. 1145811 33 Stand Up Lift Model RPS350-2

Adjusting the Base

NOTE:Forthisprocedure,refertoFIGURE 7.2.

1. Checkthatthelegsaresquarewhenintheclosedposition.

2. Placeasquareontheinsideofthelegsandbasetodeterminethe90°alignment.

3. Adjustthelinkagerodsuntil90°alignmentisachieved.

FIGURE 7.2 Adjusting the Base

Adjusting the Knee Pad Height

NOTE:Forthisprocedure,refertoFIGURE 7.3.

1. Pickaheightsettingthatwillbecomfortabletothepatientandprovidethenecessary

support.

NOTE:Thekneepadshouldbepositionedsothatthekneeportionofthelegcontactsthepad.

2. Usingbothhands,pullbothadjustmentpinsoutwardatthesametime.

3. Positionthekneepadtothedesiredheightandreleaseadjustmentpinsintothe

correspondingalignmentholes.

4. Checktomakesurethatbothpinsareengaged.

FIGURE 7.3 Adjusting the Knee Pad Height

Square Linkage Rods

Linkage Rod

Adjustment Pin

Knee Pad

Adjustment Pin

previous next