Filter
Top Products
INSTALLATION
Stand Up Lift Model RPS350-2 14 Part No. 1145811
SECTION 2— INSTALLATION
Introduction
ƽ WARNING
Use only Invacare parts in the assembly of this lift. The base legs, mast, and boom
assembly and the swivel bar are manufactured to specifications that assure correct
alignment of all parts for safe functional operation.
Assembling the Mast to the Base
ƽ WARNING
The mast may be removed from the base for storage or transporting. Each time the
mast is removed and returned to the base, the mast MUST be properly secured to
the base assembly.
NOTE:Forthisprocedure,refertoFIGURE 2.1.
1. Iflocking‐typecastersareonthelift,lockthem.
2. Removetheshoulderbolt,nutandwasher,thatsecuresthemastintheU‐shapecut‐
outofthebase.
3. PositionthemastinanuprightpositionandplacethemastintotheU‐shapedcut‐out
ofthebase.
4. Insertshoulderboltwithwashersthroughthebaseandmast.
5. Securewithnut.
FIGURE 2.1 Assembling Mast to Base
U-Shaped
Cut-Out
Washer
Shoulder
Bolt
Mast
Nut