Filter
Top Products
10
R
E
A
R
W
H
E
E
L
T
R
A
N
S
M
I
S
S
I
O
N
Outer
Hub
Spacer
Axle Washer
Wheelchair
Side Frame
Pan Head Screw
Rear Wheel
Bearing
Hub Support Plate
Axle Bolt
PROCEDURE 3 REAR WHEEL/TRANSMISSION
INSTALLING/REMOVING THE AXLE
BOLT (FIGURE 4)
Installing
1. If necessary, install rear wheel onto transmission rear
hub. Refer to INSTALLING/REMOVING THE REAR
WHEEL TO/FROM THE TRANSMISSION REAR
HUB in this procedure of the manual.
2. Insert axle bolt through rear wheel bearing.
3. Slide inner hub spacer, axle washer and outer hub
spacer over axle bolt.
4. Secure axle bolt to wheelchair side frame with hex
nut. Tighten securely.
Removing
1. Remove hex nut securing axle bolt to wheelchair side
frame.
2. Remove axle bolt from wheelchair side frame.
3. Remove inner hub spacer, axle washer and outer hub
spacer from axle bolt.
4. Remove axle bolt from rear wheel bearing.
Rear Wheel
Hub Spokes
Wheelchairs Built BEFORE 09/05/00
Wheelchairs Built AFTER 09/05/00
FIGURE 4 - INSTALLING/REMOVING REAR WHEEL TO/FROM TRANSMISSION REAR HUB -
INSTALLING/REMOVING THE HUB SUPPORT PLATES - INSTALLING/REMOVING THE AXLE BOLT
Hex Nut
Transmission
Assembly
Inner Hub Spacer
Transmission Rear Hub Slot
Transmission Rear Hub
Pan Head Screw
Hub Support Plate
Transmission Rear Hub
Transmission Rear Hub Slot
Inner Hub Spacer
Transmission
Assembly
Hex Nut
Wheelchair
Side Frame
Outer
Hub
Spacer
Axle Washer
Rear Wheel
Hub Spokes
Rear Wheel
Bearing
Axle Bolt