Filter
Top Products
Pronto®Air Personal Transporter w/ MyBody™ Seating
Adjusting the Armpad Angle (Up or Down)
1. Raise the armrest assembly vertically as shown.
2. Loosen the locknut on the angle adjustment screw.
3. Perform one of the following:
• Turn the angle adjustment screw clockwise to lower the
armrest angle.
• Turn the angle adjustment screw counterclockwise to raise
the armrest angle.
4. Tighten the locknut on the angle adjustment screw.
5. Lower the armrest to the horizontal position.
6.8 Footboard
WARNING!
– After ANY adjustments, repair or service and before
use, make sure that all attaching hardware is tightened
securely - otherwise injury or damage may result.
– Before performing any maintenance, adjustment or
service, verify that ON/OFF switch on the joystick is
in the OFF position.
– DO NOT stand on the flip-up footboard. When
getting in or out of the personal transporter, make
sure that the flip-up footboard is in the upward
position.
– Limited Clearance Between Footboard and Caster -
The user’s feet must remain on the footboard while
operating the personal transporter. If the user’s feet
are allowed to rest off the side of the footboard they
may come in contact with the caster possibly resulting
in injury.
Removing/Installing the Footboard or Adjusting the
Footboard Depth
40 1171794-B