Filter
Top Products
Pronto®Air Personal Transporter w/ MyBody™ Seating
Motor lock disengagement/engagement allows free-wheeling
or joystick controlled operation. Free-wheeling allows an
assistant to maneuver the personal transporter without
power. Motor lock levers are located on each fender
between the drive wheel and the personal transporter base
frame.
1. Perform one of the following:
• Engage (DRIVE) - Push motor lock foot lever A down,
towards the ground/floor.
• Disengage (PUSH) - Pull motor lock foot lever A up
towards the seat.
5.5 Removing/Installing the Battery Box
From/Into the Personal Transporter
CAUTION!
– Place the personal transporter in a well ventilated area
where work can be performed without risking damage
to carpeting or floor covering.
1. Ensure personal transporter power is turned off.
2. Remove the seat. Refer to 5.6 Removing/Installing the Seat
Assembly, page 29.
3. Grasp the battery box handle A and squeeze the release trigger
B.
4. Lift the battery box C up to disconnect the battery box
connectors D and remove the battery box from the personal
transporter base.
5. Reverse STEPS 3-4 to reinstall the battery box .
28 1171794-B