Invacare 1171794-B Mobility Scooter User Manual


 
Pronto®Air Personal Transporter w/ MyBody™ Seating
1. Position the personal transporter to minimize the gap distance
between the personal transporter seat and the seat to which
you are transferring.
2. Ensure the casters are aligned parallel with the object.
3. Ensure footrest is in up position.
4. Unless being used for support, place armrests in vertical position.
5. Engage motor locks.
6. Shift body weight into seat with transfer.
During independent transfer, little or no seat platform
will be beneath you. Use a transfer board if at all
possible.
Storage
WARNING!
Avoid storing or using the personal transporter near
open flame or combustible products. Serious injury or
damage to property may result.
Invacare has tested its personal transporters in
accordance with RESNA WC — 2:2009, Section 9
Part 7.3 “Rain Test”. This provides the end user or
his/her attendant sufficient time to remove his/her
personal transporter from a rain storm and retain
personal transporter operation.
DO NOT leave personal transporter in a rain storm
of any kind.
DO NOT use personal transporter in a shower.
DO NOT leave personal transporter in a damp area
for any length of time.
Direct exposure to rain or dampness will cause the
personal transporter to malfunction electrically and
mechanically; may cause the personal transporter to
prematurely rust or may damage the upholstery.
Check to ensure that the battery covers are secured
in place, joystick boot is NOT torn or cracked where
water can enter and that all electrical connections are
secure at all times.
WARNING!
DO NOT use if the joystick boot is torn or cracked. If
the joystick boot becomes torn or cracked, replace
IMMEDIATELY.
18 1171794-B