Support User Manuals

Invacare 1163197 Wheelchair User Manual

Open as PDF

of 52

SECTION 6—SEAT AND BACK

Part No. 1163197 27 Insignia

™

SECTION 6—SEAT AND BACK

ƽ WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is

tightened securely. Otherwise injury or damage may occur.

Removing/Installing the Seat Upholstery

Removing

NOTE:Forthisprocedure,refertoFIGURE 6.1.

1. Removethemountingscrewsandwashersthatsecuretheseatupholsterytotheseatrails.

2. Removetheseatupholstery.

Installing

1. Securetheseatupholsterytotheseatrailswithmountingscrewsandwashers.Tightensecurely.

FIGURE 6.1 Removing/Installing the Seat Upholstery

Removing/Installing the Seat Cushion

NOTE:Forthisprocedure,refertoFIGURE 6.2.

1. Removethehookstripsfromtheplasticbagshippedwiththewheelchair.

2. Positiononehookstrip(Detail“B”)ontopoftheloopstrip(Deatil“A”)thatarelocatedontheseatupholstery.

3. RepeatSTEP2forremainingloopstriponseatupholstery.

4. Removethebackingto

exposetheadhesiveofeachhookstrip(Detail“C”).

5. Positiontheseatcushionontopofbothhookstripsontheseatupholstery(Detail“D”).

6. Firmlypressdownonbothsidesofcushiontoensurehookstripsadheretotheundersideoftheseatcushion.

Mounting

Screws

Seat Rail

Seat

Upholstery

Seat Rail

Mounting

Screws

previous next